To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: • This unit should be mounted at the bottom of the rack if it is the only unit in the rack. • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

Microsoft Encarta Encyclopedia 2017. Data Sheet Cisco Redundant Power System 2300 ® The Cisco Redundant Power System 2300 (RPS 2300) increases availability for. Cisco Redundant Power System 2300. The Cisco RPS 2300 supplies redundant power for up to two of six connected 48-port PoE devices in a convenient.

Statement 1006. Installation Guidelines When deciding where to place the RPS 2300, be sure to observe these guidelines: • Operating environment is within the ranges listed in • Airflow around the RPS 2300 and through the vents is unrestricted. • Clearance to the front and rear panel is such that: –Front-panel indicators can be easily read.

–Access to ports is sufficient for unrestricted cabling. Sound Scheme Windows 7 Keren. –AC power cord can reach from the AC power outlet to the power supply modules on the RPS 2300 front panel. • Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting fixtures. Make sure the cabling is safely away from other devices that might damage the cables. To provide enough distance for cabling, place switches and routers using the RPS 2300 close to the RPS.

The maximum RPS cable length is 1.5 meters. • If only one power supply is installed in the RPS 2300, the spare power supply insert that ships with RPS 2300 must be installed in the empty power supply slot. • When installing the RPS 2300 is a rack with a switch stack, install the RPS 2300 at the bottom of the rack. If needed, allow one RU space between the RPS 2300 and the first switch above to provide room for cabling.

Connect the RPS cable to the switch before connecting any StackWise cables. For information about installing the RPS with the switch see the Catalyst 3750-E and Catalyst 3560-E Hardware Installation Guide. • Make sure that any power supply module or fan module is securely fastened in the RPS 2300 front panel. Box Contents Carefully remove the contents from the shipping container, and check each item for damage. If any item is missing or damaged, contact your Cisco representative or reseller for support. Return all packing material to the shipping container, and save it.

The box is shipped with these items: • The RPS 2300 (PWR-RPS2300) with one of these configurations: –One or two 750-W power supply modules (C3K-PWR-750WAC) –One or two 1150-W power supply modules (C3K-PWR-1150WAC) –One spare power supply insert (BLNK-RPS2300=). If you ordered only one power-supply module, a spare power supply insert ships with the RPS 2300. If you ordered two power-supply modules, you can order the power supply insert as a spare part.