Autohelm Sport Pilot Manual

Posted on  by

AUTOHELM SPORT PILOT: 39 user reviews, tests and trials. Download your AUTOHELM SPORT PILOT user guide or user manual Search Brand or manufacturer. User manual AUTOHELM SPORT PILOT PLUS. Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software. If the Autohelm equipment under repair. ST4000+ Autopilots Service Manual For use on Z326, Wheel Autopilot. When the pilot is fully powered down.

Autohelm Sport Pilot ManualAutohelm Sport Pilot Manual

] Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. SportPilot and SportPilot Plus Owner's Handbook Document number: 81057-5 Date: May 2001 ii SportPilot and SportPilot Plus - Owner's Handbook Autohelm, HSB (High Speed Bus), SailPilot, SeaTalk and SportPilot are registered trademarks of Raymarine Ltd. Raymarine, AST (Advanced Steering Technology), AutoAdapt, AutoLearn, AutoRelease, AutoSeastate, AutoTack, AutoTrim, FastTrim, GyroPlus, RayGyro, RayPilot and WindTrim are trademarks of Raymarine Ltd. Handbook contents © Raymarine Ltd 2001. Chessmaster Ware here.

Preface iii Contents Chapter 1: Introduction Livro 1001 Noites Pdf. ............................................................ 1 About this handbook................................................................. 3 Important Information.............................................................. ] Making sure the cable exits at the bottom of the compass, secure the fluxgate compass using the self-tapping screws provided (No 8 x 3/4 in, pan-head). Note: Stick the supplied warning label near to the compass, where it is clearly visible. 4 Installing the SportPilot Compass cabling 1.

Route the cable to the steering station, taking into account the EMC installation guidelines (page 22). Note: You will plug the moulded connector into the COMPASS socket when installing the SportPilot (see page 45). You will also need to attach the supplied suppression ferrite behind the bulkhead as close as possible to the SportPilot. Chapter 4: Installing the SportPilot 25 D1515-2 Cutting and joining the compass cable You should not cut and rejoin the fluxgate compass cable unless absolutely necessary.

If you do have to cut the cable, use Scotchlock connectors to re-join the wires color for color. D1544-2a Note: Scotchlock connectors are not supplied with the Fluxgate Compass.

These must be purchased from your local dealer. 4 Installing the SportPilot 26 SportPilot and SportPilot Plus - Owner's Handbook 4. 3 Installing the rudder position sensor ­ optional A rudder position sensor will improve your SportPilot's performance by providing precise information about the rudder's position.

CAUTION: If your boat has a hydraulic helm pump, you MUST fit a rudder position sensor for the SportPilot to function accurately. Depending on your boat's steering system, you will need to use either a linear or rotary rudder sensor.

Generally, you will need: a linear rudder sensor if your boat has an outboard engine steered by a `bullhorn' style hydraulic ram a rotary rudder sensor if your boat has an inboard ram. Linear rudder position sensor ­ installation (hydraulic outboard steering systems) Note: Hydraulic outboard steering systems MUST be fitted with a linear rudder position sensor. Cisco Packet Tracer 6 For Windows 8. The linear rudder position sensor (part number: Z229) is designed for `bullhorn' style hydraulic outboard steering systems. It is totally weatherproof and designed to be mounted on the bullhorn ram.